跳转到主内容

跳到步骤#6

Taylor Atterbury编辑

等待批准

已删除
已添加
不变

步骤行

[* blackred] Turn the monitor on its side so that the power supply and circuit board are facing to the right
[* blackred] Remove the two 6.6mm screws located on the right and left side of the metal casing. Use a Phillips #2 screwdriver to remove all four.
[* blackred] Turn the monitor on its side so that the power supply and circuit board are facing to the right
[* blackred] Remove the two 6.6mm screws located on the right and left side of the metal casing. Use a Phillips #2 screwdriver to remove all four.