跳转到主内容

跳到步骤#6

Keith编辑

等待批准

已删除
已添加
不变

步骤行

[* black] Turn the monitor on its side so that the power supply and circuit board are facing to the right
[* black] Remove the two X.Xmm6.6mm screws located on the right and left side of the metal casing nearest to the power supplycasing. Use a Phillips #2 screwdriverscrewdriver to remove all four.
[* black] Remove the two X.Xmm6.6mm screws located on the right and left side of the metal casing nearest to the power supplycasing. Use a Phillips #2 screwdriverscrewdriver to remove all four.