跳转到主内容

修复你的物品

维修的权力

配件 & 工具

跳到步骤#1

mmonagan编辑

编辑已通过 由 Andrew Optimus Goldheart

之前
之后
不变

步骤行

[* black] Disconnect the right fan cable from the logic board by placing a spudger beneath the cable and lifting up.
[* black] Remove the three silver T6 Torx screws securing the right fan
Be sure to the logic board and lower case.
[* black] Lift
lift up on the right fan up and carefully peel up the tape securing the fan to the heat sinkside as you goshown.
[* black] Disconnect the right fan cable from the logic board by placing a spudger beneath the cable and lifting up.
[* black] Remove the three silver T6 Torx screws securing the right fan
Be sure to the logic board and lower case.
[* black] Lift
lift up on the right fan up and carefully peel up the tape securing the fan to the heat sinkside as you goshown.

图片2

已删除

图片3

已删除