跳转到主内容

跳到步骤#16

Kyle Wiens编辑

等待批准

之前
之后
不变

步骤行

-[* black] Once we had the AirPort/Bluetooth board removed, the only thing preventing us from taking out the logic board was two connectors and a Torx screw.
-[* black] We first disconnected the power button cable and the power-on LED.
-[* red] A T10 Torx screwdriver was used to remove the standoff screw.
+[* black] Once we had removed the AirPort/Bluetooth board, the only thing preventing us from taking out the logic board was two connectors and a T10 Torx screw.
+[* black] Disconnect the power button cable and the power-on LED.
+[* red] We used a T10 Torx screwdriver to remove the standoff screw.

图片1

旧版本

新版本