跳转到主内容

跳到步骤#15

Kyle Wiens编辑

等待批准

之前
之后
不变

步骤行

[* black] On to the AirPort/Bluetooth board removal. A couple of steps are needed to remove the board:
- [* black] Disconnect the three antennas
- [* black] Disconnect the AirPort/Bluetooth communication cable.
- [* orange] Remove three Phillips screws, allowing the AirPort/Bluetooth board to be completely separated from the rest of the computer.
+ [* black] Disconnect the three antennas (marked in red).
+ [* black] Disconnect the AirPort/Bluetooth communication cable (second photo).
+ [* orange] Remove three Phillips screws (third photo) and then completely remove the AirPort/Bluetooth board.