跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#5

Jeff Suovanen编辑

编辑已通过 由 Jeff Suovanen

之前
之后
不变

步骤行

[* black] Locate the bulb cover at the back of the assembly. Unclip and open the cover to expose bulbs.
[* black] Remove the electrical connector and pull out the bulb that you want to replace. The highlow beam bulb is held in place with a clip. Other bulbs are held by friction; use pliers to gently pull them out.
[* black] Remove the electrical connector and pull out the bulb that you want to replace. The highlow beam bulb is held in place with a clip. Other bulbs are held by friction; use pliers to gently pull them out.
[* black] Put in the replacement bulb and reattach the connector. Do not touch the bulb glass with your bare hands -- oils from your fingers will remain on the glass and cause it to crack when it heats after turning the lights on.
[* black] Replace the bulb cover.