跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#1

Nick Ivanov编辑

等待批准

之前
之后
不变

步骤行

[* black] Before you decide to change a burnt-out bulb, make sure it's not the blown fuse that keeps you in the dark. You will need to open the fuse block cover that is located on the left hand side of the dashboard. Use a thin flat object, such as a flat head screwdriver or a key to pop open the cover.
[* black] Under the cover you will see a number of multicoloured fuses.
[* black]
Use the reference card and the white plastic tweezers attached to the back of the fuse cover to locate and pull out fuses responsible for headlights. Pullheadlight bulbs. Fuses 18 and 19 are for high beam bulbs; 20 and 21 - for low beam; 22 and 23 - for parking lights. Pull fuses one by one so as not to mix them up.
[* black] Fuse body is semi-transparent. Look at it from the side to see if the fuse is good, as shown in the picture, or blowngood.
[* black] Under the cover you will see a number of multicoloured fuses.
[* black]
Use the reference card and the white plastic tweezers attached to the back of the fuse cover to locate and pull out fuses responsible for headlights. Pullheadlight bulbs. Fuses 18 and 19 are for high beam bulbs; 20 and 21 - for low beam; 22 and 23 - for parking lights. Pull fuses one by one so as not to mix them up.
[* black] Fuse body is semi-transparent. Look at it from the side to see if the fuse is good, as shown in the picture, or blowngood.

图片3

旧版本

新版本