跳转到主内容

修复你的物品

维修的权力

配件 & 工具

跳到步骤#1

Dayton编辑

编辑已通过 由 Dayton

之前
之后
不变

步骤行

[* black] Pull the pump handle all the way down and hold it in this positionposition, exposing the pump rod.
[* black] Place the brass spacer around the plunger pushpump rod and under the chain attachment point.
[* icon_caution] Make sure the spacer is beveled side down, and flat side up.
[* black] Pull the pump handle all the way down and hold it in this positionposition, exposing the pump rod.
[* black] Place the brass spacer around the plunger pushpump rod and under the chain attachment point.
[* icon_caution] Make sure the spacer is beveled side down, and flat side up.
[* black] Lift the pump lever until there is no tension in the chain and hold it in this position.