跳到这一步
由 Ricky Jaimez — 编辑
编辑已通过 由 Ricky Jaimez
- 之前
- 之后
- 不变
步骤行
| [* black] Using a Phillips head screw driver, loosen the two hard drive access screws but DO NOT remove. The screws will stay in place once you loosen them and the access plate begins to lift off of the laptop. | |
| [* black] Lift the access plate off and place it to the side out of your way. | |
| - | [* icon_note] Place the access plate down so that the screws do not accidently fall out. |
| + | [* icon_note] Place the access plate down so that the screws do not accidently fall out. Thes screws are tiny and can get away fast so using a magnetic board is a good way to keep track. |