跳转到主内容

跳到步骤#13

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

之前
之后
不变

步骤行

-[* black] Disengage two connectors on a small circuit board on the bottom of the 2nd hard disk bay and lift the screened cable off the bay.
+[* yellow] Disengage two connectors on a small circuit board on the bottom of the 2nd hard disk bay and lift the screened cable off the bay.
+[* green] Remove 2 6.5mm black screws. (On reassembly it's important to put these screws back in the right holes otherwise the front cover of the laptop won't fit.
+[* black] Gently lift the motherboard from the right hand edge and disengage its connectors from their openings in the side of the laptop lower shell. You can now remove it completely.

图片1

没有之前的图片

已添加