跳转到主内容

跳到步骤#9

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

之前
之后
不变

步骤行

[title] Upper shell - 1
[* black] Close the laptop and lay it upside down.
[* black] Remove nine 6.5mm screws as follows:
[* red] Three from the front edge.
- [* orange] Four from the 2nd hard disk bay. (One of these is recessed and two others are soft plastic flaps.)
+ [* orange] Four from the 2nd hard disk bay. (One of these is recessed and two others are beneath soft plastic flaps.)
[* yellow] One from the corner of the RAM bay.
[* green] One from a corner of the hard disk bay.