跳转到主内容

跳到这一步

Tobias Isakeit编辑

编辑已通过 由 Tobias Isakeit

之前
之后
不变

步骤行

+[* black] Unlock the flex cables by pushing two black nibs on both sides of each connector.
+[* black] Now you can pull the flex cables out and remove the keyboard completely.
+[* icon_reminder] When installing the new keyboard, make sure to remove the protective film underneath the screen.
+[* icon_note] The OP-1 has a mode to test specific functions. You can enter it by holding the "COM" button while powering on, then choose the function test (3). You don't have to complete every test and can power off after the keyboard test.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加