跳到步骤＃20
由 Evan Noronha — 编辑
编辑已通过 由 Evan Noronha
- 之前
- 之后
- 不变
步骤行
| + | [* black] Continue peeling up the tape over the speaker ribbon cables until there is enough slack in the left speaker cable to disconnect it. |
|---|---|
| + | [* icon_note] Do not completely remove this tape—it will be easier to replace if you leave a section still attached to the rear case. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加