跳到步骤＃4
由 Kevin M Cuddeback — 编辑
编辑被拒绝 由 David Hodson
- 之前
- 之后
- 不变
步骤行
| [* black] Use the spudger to remove the black masking tape. This will reveal the top two screws in the picture. | |
| - | [* red] Unscrew the four Phillips screws. |
| - | [* black] Use a spudger to disconnect the black connector. |
| - | [* black] Use a spudger to disconnect the black connector. |
| + | [* red] Unscrew the four Phillips screws. They are of different sizes. The screw by the battery wires is the shortest. The screws under the tape are alike. The screw by the black connector is the longest |
| + | [* black] Use a spudger to disconnect the black connector at the end of the diagonal ribbon cable. |