跳转到主内容

跳到步骤#3

Andrew Bookholt编辑

等待批准

之前
之后
不变

步骤行

+[* black] Lift the inner edge of the optical drive and maneuver its connector past the GPU frame attached to the logic board.
+[* black] Carefully pull the optical drive off its mounting pins on the right side of the outer case to gain clearance for disconnecting the optical drive cable.
+[* black] Allow the optical drive to hang down as you de-route the optical drive thermal sensor connector from behind the GPU heat sink.

图片1

没有之前的图片

已添加