跳到步骤#7
由 Patrick Demorest — 编辑
编辑已通过 由 Patrick Demorest
- 之前
- 之后
- 不变
步骤行
[* black] After all the capacitors are safely discharged, flip the housing over and remove all of the remaining screws from the back. |
[* black] Flip it onto its side and remove the two screws attaching the powerboard to the power port. |
[* black] Remove the four screws from the powerboard itself. This frees the powerboard from the housing. The powerboard is the larger of the two boards. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加