跳转到主内容

跳到步骤#2

Simon Balis编辑

编辑已通过 由 Simon Balis

之前
之后
不变

步骤行

[* icon_note] The six screws that were removed in the previous step are the same six screws that hold the motherboard in place.
-[* black] Surprisingly there are only three wires that connect to the motherboard.
-[* icon_caution] Be very careful when removing the three ribbon wires. If these wires break it can cause problems with other systems. Causing the other systems to need replaced themselves.
+[* black] There are a few ribbon cables that connect to the motherboard to the rest of the camera with some of them hiding under other ribbon cables.
+[* icon_caution] Be very careful when removing the ribbon wires. If they break it can cause problems with other systems. Causing the other systems to need replaced themselves.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加