跳转到主内容

跳到步骤#1

Daniel Eagan编辑

编辑已通过 由 Daniel Eagan

之前
之后
不变

步骤行

+[* black] The rear side of the camera is where the motherboard is located. It is visible after you have taken off the rear face plate.
+[* black] Before you can take the mother board off you have to remove the shield that protects it from static.
+[* black] This shield has six Philips #00 screws that are positioned around the edge of the shield.
+[* black] After removal of the screws the shield will come free from the motherboard.