跳转到主内容

Fix Your Stuff

Right to Repair

Parts & Tools

跳到步骤#2

Andrew Optimus Goldheart编辑

编辑已通过 由 Andrew Optimus Goldheart

已删除
已添加
不变

步骤行

[* black] Remove the following two screws:
[* red] One 3.3 mm Phillips screw
[* orange] One 2.1 mm Phillips screw
[* black] Lift the metal retainer clip straight up from its recess in the rear panel.
[* icon_note] If the camera comes up with the retaining clip, don't worry. Just separate the camera from the clip before reinstalling, so you can be sure to get the connector in the right place.
[* icon_caution] Be sure the small thermal pad is attached to the metal retaining clip as seen in the third picture when replacing the rear camera.