跳到步骤＃2
由 Andrew Bookholt — 编辑
- 已删除
- 已添加
- 不变
步骤行
| [* black] Remove the following two screws: |
| [* red] One 3.3 mm Phillips screw |
| [* orange] One 2.1 mm Phillips screw |
| [* black] Lift the metal retainer clip straight up from its recess in the rear panel. |
| [* icon_caution] Be sure the small thermal pad is attached to the metal retaining clip as seen in the third picture when replacing the rear camera. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加