跳转到主内容

跳到步骤#2

Kelsea Weber编辑

编辑已通过 由 Kelsea Weber

之前
之后
不变

步骤行

-[* black] Disconnect the set of wires from the back casing to the motherboard. Do this by using the plastic spundger to flip the black tab up and the wires will pull out.
-[* red] Unscrew the four 3 mm and two silver 1 mm PH000 screw from the green logic board
+[* red] Disconnect the set of wires from the back casing to the motherboard. Do this by using the plastic spundger to flip the black tab up and the wires will pull out.
+[* light_blue] Unscrew the four 3 mm and two silver 1 mm PH000 screw from the green logic board

图片1

旧版本

新版本