跳转到主内容

跳到步骤#1

Miroslav Djuric编辑

等待批准

之前
之后
不变

步骤行

-[* black] Stuff
+[* black] Remove the hard drive rubber side protectors from the drive sides.
+[* black] Use a small iPod opening tool to release the black hinge holding the hard drive ribbon cable.
+[* black] Use your forefinger to hold the ribbon cable in place; separate the drive from the ribbon cable.
+[* icon_caution] Make sure the hard drive rubber side bumpers are put back on the drive before reinstalling it. Use the hard drive rubber side bumper installation guide to accomplish this task.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加