跳转到主内容

跳到步骤#4

Andrew Bookholt编辑

等待批准

已删除
已添加
不变

步骤行

[* black] Insert wisdom hereicon_note] In the following steps, you will be working on your new upper case.
[* red] Use a T6 Torx screwdriver to loosely install the 1.2 mm set screw included with your new upper case into its tapped hole near the middle of the trackpad opening on your new upper case.
[* icon_caution] Only tighten it about one turn for now
.
[* black] Insert wisdom hereicon_note] In the following steps, you will be working on your new upper case.
[* red] Use a T6 Torx screwdriver to loosely install the 1.2 mm set screw included with your new upper case into its tapped hole near the middle of the trackpad opening on your new upper case.
[* icon_caution] Only tighten it about one turn for now
.