跳转到主内容

跳到步骤#3

Alex Jansen编辑

编辑已通过 由 Alex Jansen

之前
之后
不变

步骤行

-[* red] Remove the two 1.9mm Phillips #00 screws securing the vibrator to the rear panel.
+[* red] Remove the two 1.9mm Phillips #00 screws securing the vibrator to the rear case.
[* black] Lift the vibrator up and out of the iPhone.
[* black] Keep these screws separate from the others as these have a smaller diameter than the others.