跳转到主内容

跳到步骤#3

faorazem编辑

等待批准

之前
之后
不变

步骤行

[* black] Remove the following 4 screws:
- [* red] Three 1.8 mm Phillips #00 screws securing the headphone jack and GPS antenna to the rear panel.
+ [* red] Three 1.8 mm Phillips #00 screws securing the headphone jack and GPS antenna to the rear panel. Note that the head of the middle screw is smaller in diameter. Also make note of the washer underneath the ribbon cable secured by the rightmost screw.
[* orange] One 3.8 mm Phillips #00 screw in the plastic loop near the headphone jack.