跳到步骤＃2
由 Miroslav Djuric — 编辑
- 之前
- 之后
- 不变
步骤行
| [* icon_note] There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly. |
| [* black] Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly. |
| [* black] Insert a metal spudger into the seam between the silver front bezel and the black display assembly on the edge closest to the home button. Gently pry the display assembly up from its bezel. |
图片1
没有之前的图片
已添加