跳转到主内容

跳到步骤#4

Ron Davis编辑

编辑已通过 由 Ron Davis

之前
之后
不变

步骤行

-[* icon_caution] There is a cable connecting the face plate to the device. Be sure to carefully disconnect that cable in order to access the components beneath.
-[* icon_note] The device opens like a clam shell. There are wires connected to the motherboard with solder and glue that don't allow it to fully detach.
+[* red] Use a small, pointed metal spudger to release the plastic tabs connecting the faceplate to the bottom of the speaker.
+[* icon_caution] A small cable connects the faceplate to the device. Carefully disconnect the cable before opening the device.
+[* black] Slowly flip the device open like a clam shell.
+ [* icon_note] There are several wires soldered to the motherboard that prevent the faceplate from detaching completely.

图片1

旧版本

新版本

图片2

旧版本

新版本

图片3

没有之前的图片

已添加