跳转到主内容

跳到步骤#3

Patrick Zhang编辑

编辑已通过 由 Patrick Zhang

之前
之后
不变

步骤行

+[* icon_note] The screen is held with adhesive, so use the iOpener to apply heat to the device.
[* black] Once you applied the iOpener on the device, use a metal spudger to pry the screen free.
-[* icon_note] The screen is held with adhesive, so use the iOpener to apply heat to the device.
-[* icon_caution] Be careful with sharp edges
-[* black] Once the broken screen is set free, replace it with the screen replacement.
+[* icon_caution] Beware of sharp edges
+[* black] Once the broken screen has been set free, put in the screen replacement.