跳到步骤#7
由 tony — 编辑
编辑被拒绝 由 Jake Devincenzi
- 之前
- 之后
- 不变
步骤行
[* black] Depending on your spare part - you might not need to do some of these steps: |
[* black] Use the small iPod opening tool to carefully peel the orange ribbon cable and attached black Hold switch up from the metal backing. |
[* icon_reminder] When re-attaching the replacement Hold switch, make sure the two small posts on the back of the switch are aligned with the two holes in the metal backing. |