跳转到主内容

跳到步骤#6

Miroslav Djuric编辑

等待批准

已删除
已添加
不变

步骤行

[* icon_note] If your replacement headphone jack includes the white plastic hold switch, simply reinstall the headphone jack. If your replacement part does not include the plastic hold switch, follow the next steps to transfer the plastic hold switch to your new headphone jack.
[* icon_note] If you're just trying to remove the rear panel, you can skip Steps 30 and 31.
[* red] Remove the single Phillips screw nearest to the hold switch.
[* black] Lift the plastic portion of the Hold switch away from the orange ribbon cable.
[* icon_reminder] Ensure that the black notch lines up with the gray slider during reassembly of the switch (see picture 2).

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加