跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#3

Ryan Lackey编辑

编辑已通过 由 Ryan Lackey

之前
之后
不变

步骤行

[* black] Underneath the control panel will be a flat grey ribbon cable. This cable is attached at the base of the green control board with the other end of the cable located on the back side of the printer's base.
[* black] Carefully disconnect both ends of the flat grey ribbon cable to release the control panel in its entirety.
[* icon_note] Only pull from the connector portion of the cable, as pulling on the wires may damage them.