修复你的物品

维修的权力

商店

跳到步骤＃3

由 Omar Cuevas — 编辑

编辑已通过 由 Omar Cuevas

之前
之后
不变

步骤行

[* black] Gently pull both white strips to disconnect them fromUnderneath the undersidecontrol panel will be a flat grey ribbon cable. This cable is attached at the base of the green control board with the other end of the cable located on the back side of the printer's base.
[* black] Carefully disconnect both ends of the flat grey ribbon cable to release the control panelpanel in its entirety.
[* black] Gently pull both white strips to disconnect them fromUnderneath the undersidecontrol panel will be a flat grey ribbon cable. This cable is attached at the base of the green control board with the other end of the cable located on the back side of the printer's base.
[* black] Carefully disconnect both ends of the flat grey ribbon cable to release the control panelpanel in its entirety.