跳转到主内容

Fix Your Stuff

Right to Repair

Parts & Tools

跳到步骤#9

Claudio Felix编辑

编辑已通过 由 Claudio Felix

已删除
已添加
不变

步骤行

[title] Remove flat cable linking the camera's body to the back casing
[* red] Locate the connector which holds the flat cable to the main circuit board. Unlock the connector by gently pulling up its black piece from the side the flat cable comes into it.
[* blue] Pull the flat cable from the connector and you'll have completely removed the back casing from the camera.
[* icon_note] Note I taped each of the screws to their original places on the removed back casing, so I don't loose or mix any of them.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加