跳到步骤＃8
由 Claudio Felix — 编辑
编辑已通过 由 Claudio Felix
- 之前
- 之后
- 不变
步骤行
| + | [title] Remove flat cable from back casing |
|---|---|
| + | [* blue] Carefully lift the back casing from the camera's body from left to right. |
| + | [* red] Locate the ZIF connector which holds the flat cable to the back casing. Unlock the connector by gently pulling its black piece from the side the flat cable comes into it. |
| + | [* orange] Pull the flat cable from the connector and then you'll have completely removed the back casing from the camera. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加