修复你的物品

维修的权力

配件 & 工具

跳到步骤＃6

由 Jonas Kvale — 编辑

编辑被拒绝 由 Jake Devincenzi

之前
之后
不变

步骤行

[* icon_caution] This step is extremely tricky, and has the potential to ruin your computer. It is easy to pull the plug with the red and black leads (the power) out of the motherboard. If you do that, it is nearly impossible to fix.
[* black] Peel up the two pieces of foil tape on the left side of the keyboard area.
[* icon_caution] The connectors at the ends of the cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic board.
[* black] Carefully disconnect the microphone and power cables from the logic board. Using your fingernails or a dental pick, carefully pry the connectors from their sockets. MakeMake sure you're pulling only on the connector and not on the socket. The trick is to pull up on the plug while pushing down on the connector. A spudger or a flathead screwdriver is best for this operation.
[* black] Carefully disconnect the microphone and power cables from the logic board. Using your fingernails or a dental pick, carefully pry the connectors from their sockets. MakeMake sure you're pulling only on the connector and not on the socket. The trick is to pull up on the plug while pushing down on the connector. A spudger or a flathead screwdriver is best for this operation.