跳到步骤#5
步骤行
[* black] Turn the computer over and open it up. |
[* black] Remove the following |
[* black] Remove the following |
[* red] Six 2.5 mm Phillips on either side of the keyboard area. |
[* orange] Five 4.5 mm Phillips on the left half of the keyboard area. |
[* yellow] One 7 mm hex in the upper left corner of the upper case (a T6 Torx driver will do the job nicely). |
[* green] One 15 mm Phillips in the upper middle of the keyboard area. |
[* blue] One 16.5 mm hex in the upper right of the upper case (again, a T6 Torx driver will work well). |