跳转到主内容

跳到步骤#1

Nathan Brady编辑

等待批准

已删除
已添加
不变

步骤行

[* blackicon_note] The LCD screen is attached to the piece of the hood with the glass shield.
[* blackicon_caution] Two ribbon wires are connected to the LCD module. The smaller of the two cannot be removed. Do'''Do not remove the small ribbon wire.wire.'''
[* red] The LCD is attached to the hood by two slots as shown in red. Push the sloped slides of the slots inward to detachrelease the slots from the hood.
[* blackicon_note] The LCD screen is attached to the piece of the hood with the glass shield.
[* blackicon_caution] Two ribbon wires are connected to the LCD module. The smaller of the two cannot be removed. Do'''Do not remove the small ribbon wire.wire.'''
[* red] The LCD is attached to the hood by two slots as shown in red. Push the sloped slides of the slots inward to detachrelease the slots from the hood.