跳到步骤＃2
由 Andrew Optimus Goldheart — 编辑
编辑已通过 由 Andrew Optimus Goldheart
- 之前
- 之后
- 不变
步骤行
| - | [* black] Lift the LCD from its long edge closest to the volume buttons and rotate it out of the rear case. |
|---|---|
| - | [* black] Lay the LCD on the front panel as seen in the second picture. |
| + | [* icon_note] The front panel ribbon cables are connected beneath the LCD. To access them, you'll need to temporarily flip the LCD over and out of the way. |
| + | [* icon_caution] Be very careful when moving the LCD, and do not attempt to remove it from the iPad—its display data cable will remain connected while it is rotated over. |
| + | [* black] Lift the LCD from its long edge closest to the volume buttons and gently flip it out of the rear case—like turning the page in a book. |
| + | [* black] Set the LCD face down on the front panel. |