跳转到主内容

修复你的物品

维修的权力

配件 & 工具

跳到步骤#3

Carlos Aquino编辑

编辑已通过 由 Carlos Aquino

已删除
已添加
不变

步骤行

[* black] The ribbon cable is attached to the motherboard by a ZIF (Zero Insertion Force) connector.
[* black] Using the plastic opening toolmetal probe, gently pop up the ZIF connector tab and remove the ribbon cable. This will allow you to separate the front panel from the motherboard.
[* black] Using the plastic opening toolmetal probe, gently pop up the ZIF connector tab and remove the ribbon cable. This will allow you to separate the front panel from the motherboard.
[* black] Gently pull the front panel away and set it on your workstation.

图片1

旧版本

新版本