Skip to main content

Changes to Step #5

Edit by Naneek

编辑已通过 by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* black] Disconnect the black fan connector and two temperature sensor connectors from the logic boardboard by pulling/prying up.
[* black] Disconnect the black fan connector and two temperature sensor connectors from the logic boardboard by pulling/prying up.
[* icon_note] If you have a MacBook Core 2 Duo Santa Rosa/Penryn/Early 2009, there is only one temperature sensor.
[* icon_reminder] The heat sink in early 2009 MacBooks may look slightly different.