Skip to main content

Changes to Step #5

Edit by adlerpe

等待批准

Deleted
Added
Unchanged

Step Lines

[* black] Disconnect the black fan connector and two temperature sensor connectors by pulling straight up from the logic board. A spudger hooked underneath the cables may make this easier.
[* black] Disconnect the black fan connector and two temperature sensor connectors by pulling straight up from the logic board. A spudger hooked underneath the cables may make this easier.
[* icon_note] If you have a MacBook Core 2 Duo Santa Rosa/Penryn/Early 2009, there is only one temperature sensor.
[* icon_reminder] The heat sink in early 2009 MacBooks may look slightly different.