跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#7

Naveen Krishan编辑

等待批准

之前
之后
不变

步骤行

[* black] This next step is easier with two people. Carefully have one person lift the hood of the printer 2-3 inches above where it was resting.
[* blackyellow] The second person will now remove the cables and ribbon cables attached toand wires attaching the motherboard(themotherboard (the only green PCB board) to the hood by gently pulling on them.
[* blackyellow] The second person will now remove the cables and ribbon cables attached toand wires attaching the motherboard(themotherboard (the only green PCB board) to the hood by gently pulling on them.
[* black] When all three cables are removed, lift the hood away from the printer and set it aside.