跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#7

Justin Cogan编辑

编辑已通过 由 Justin Cogan

之前
之后
不变

步骤行

[* black] This step is easier with two people. Carefully have one person lift the hood of the printer 2-3 inches above where it was resting.
[* yellowred] The second person will now remove the ribbon cables and wires attaching the motherboard (the only green PCB board) to the hood by gently pulling upward on them.
[* black] When all three cables are removed, lift the hood away from the printer and set it aside.
[* yellowred] The second person will now remove the ribbon cables and wires attaching the motherboard (the only green PCB board) to the hood by gently pulling upward on them.
[* black] When all three cables are removed, lift the hood away from the printer and set it aside.
[* black] When all three cables are removed, lift the hood away from the printer and set it aside.

图片2

旧版本

新版本