跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#5

Justin Cogan编辑

编辑已通过 由 Justin Cogan

之前
之后
不变

步骤行

[* black] To access and remove the forth and final screw attaching the hood of the printer, the face for the power button needs to first be removed as follows:
[* yellowred] Reach into the mouth of the printer and press on the small clip behind the power button. This will enable the face of the power button to be removed.
[* black] To access and remove the forth and final screw attaching the hood of the printer, the face for the power button needs to first be removed as follows:
[* yellowred] Reach into the mouth of the printer and press on the small clip behind the power button. This will enable the face of the power button to be removed.
[* icon_note] A picture of the power button removed is provided to show the location of the clip that needs to be pressed.
[* black] After pressing the clip, pull out the face of the power button: right side to left side.

图片2

旧版本

新版本