跳到步骤＃1
由 Blake Ehlers — 编辑
编辑已通过 由 Blake Ehlers
- 之前
- 之后
- 不变
步骤行
| - | [* red] Locate the four 8.1mm |
|---|---|
| + | [* red] Locate the four 8.1mm PH00 screws on the corners of the GoPro and unscrew them using the phillips screwdriver. |
| [* black] Gently remove the motherboard by using a plastic opening tool to pry it out of the housing. | |
| [* icon_caution] Be careful not to damage the ribbon cable connected to the GoPro housing and motherboard. |