菜单

你的设置

跳到步骤＃4

由 Kurtis Kosiancic — 编辑

编辑已通过 由 Nick

已删除
已添加
不变

步骤行

[* red] Disconnect power connector with a plastic opening tool.
[* red] Unscrew one black 50 mm5mm screw from hard drive controller PCB using a #0 Phillips screwdriver.
[* red] Unscrew one black 50 mm5mm screw from hard drive controller PCB using a #0 Phillips screwdriver.
[* black] Remove hard drive controller.