跳转到主内容

跳到步骤#2

villeda编辑

等待批准

已删除
已添加
不变

步骤行

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] OneTwo 3 mm Phillips #0. (Head: 2.75 mm. dia.) to the left
[* orange] TwoOne 4 mm Phillips #0 on the either side. (Head: 2.75mm dia.) to the side of batt conector
[* red] OneTwo 3 mm Phillips #0. (Head: 2.75 mm. dia.) to the left
[* orange] TwoOne 4 mm Phillips #0 on the either side. (Head: 2.75mm dia.) to the side of batt conector