跳转到主内容

跳到步骤#2

David Hodson编辑

等待批准

已删除
已添加
不变

步骤行

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] One 3 mm Phillips #0. (Head: 2.75 mm. dia.) This is the centre of the 3 screws, unlike the picture shown
[* red] One 3 mm Phillips #0. (Head: 2.75 mm. dia.) This is the centre of the 3 screws, unlike the picture shown
[* orange] Two 4 mm Phillips #0 on the either side. (Head: 2.75mm dia.)

图片1

旧版本

新版本