跳转到主内容

跳到步骤#5

mark编辑

编辑已通过 由 mark

之前
之后
不变

步骤行

[title] Unscrew the motherboard
[* black] To remove the mother board undo the Torx T10 screws shown in the yellow circles. (There's one behind a cable bottom right)
[* black] Hopefully I've circled them all. (undo any screw on the mother board that has a white circle printed on the board.)
-[* black] Oh, you'll also have to yank out the infra-red sensor behind the Apple logo. Just pull up. I's spring loaded in there...
+[* black] Oh, you'll also have to yank out the infra-red sensor behind the Apple logo. Just pull up. It's spring loaded in there...