跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#5

Lauren Mannix编辑

编辑已通过 由 Lauren Mannix

之前
之后
不变

步骤行

[* red] Use a soldering iron to remove the wires from the sensor chip by melting the metal joints on the chip.
[* black] Use the tweezers to remove the wires as you are soldering them.
[* icon_caution] Be careful not to touch any of parts of Zoomer Dino Boomer or yourself when using the soldering iron. The soldering iron will be very hot.
[* icon_note] When reassembling, extra solder may be required to reconnect the wires with the circuit board.